The Vogelzang Durango Wood Burning Stove is a popular heating solution known for its efficiency and reliability. In this article, we’ll provide a concise technical review of the Vogelzang Durango stove. Whether you’re considering this stove for your home or are a technician seeking detailed information, this article will offer a clear understanding of its technical features, proper operation, and maintenance requirements.
Key Technical Features of the Vogelzang Durango Wood Burning Stove
Heating Capacity: The Vogelzang Durango is designed to heat spaces effectively. It can comfortably heat an area of up to 1,500 square feet, making it suitable for medium to large rooms.
Firebox Size: This stove features a firebox that can accommodate logs up to 17 inches in length. The large firebox allows for longer burn times and less frequent reloading.
Emissions: The Vogelzang Durango is EPA certified, ensuring it meets stringent emission standards. It’s designed to burn wood efficiently while minimizing the release of pollutants.
Air Wash System: The stove is equipped with an air wash system, which helps keep the glass clean during operation, providing a clear view of the flames and reducing maintenance.
Burn Time: Depending on the burn rate and the type of wood used, the Vogelzang Durango can provide a burn time of up to 8 hours. This long burn time is a testament to its efficiency.
Heat Output: The stove has a heat output rating of up to 73,790 BTUs per hour, ensuring that it can effectively heat the designated space.
Proper Operation of the Vogelzang Durango Stove
To operate the Vogelzang Durango wood burning stove efficiently and safely, follow these guidelines:
Installation: Ensure that the stove is installed by a certified professional. Proper installation is critical for safety and compliance with local regulations.
Wood Selection: Use seasoned hardwood with a moisture content of 20% or less. Dry wood burns more efficiently and produces less creosote.
Loading: Place wood logs in the firebox, leaving some airspace for proper airflow. Avoid overloading the stove.
Air Control: Adjust the air intake controls as needed to regulate the burn rate and temperature. Open the controls fully for ignition and then adjust them for a slower burn.
Safety: Maintain a safe distance between the stove and combustible materials. Install a carbon monoxide detector and ensure that your chimney or flue is regularly cleaned and inspected.
Maintenance of the Vogelzang Durango Stove
Proper maintenance is essential for the Vogelzang Durango’s longevity and efficient operation:
Regular Cleaning: Clean the stove’s interior, glass, and flue components on a regular basis to prevent blockages and ensure efficient combustion.
Gasket Inspection: Periodically check the door and glass gaskets for wear and replace them if necessary to maintain an airtight seal.
Ash Removal: Dispose of ashes safely and routinely to maintain proper airflow. A thick layer of ash can reduce stove efficiency.
Professional Service: Schedule annual professional inspections to ensure the stove is in excellent working condition and to address any potential issues.
Conclusion
The Vogelzang Durango Wood Burning Stove is a reliable and efficient heating solution known for its technical prowess. By adhering to the guidelines for proper operation and maintenance outlined in this article, you can enjoy a warm and cozy atmosphere in your home while maximizing the stove’s performance and lifespan. Whether you’re a homeowner or a technician, this technical review should equip you with a clear understanding of the Vogelzang Durango wood burning stove.