US Stove Company has established a reputation for manufacturing high-quality wood burning furnaces that are both efficient and dependable. In this technical article, we’ll explore the key features and specifications of the US Stove Company wood burning furnace, providing clear and concise information that caters to both technical and non-technical audiences.
- Efficiency and Heating Capacity
The US Stove Company wood burning furnace is known for its exceptional heating efficiency. These furnaces are designed to provide a reliable and consistent heat source for larger spaces. The heating capacity is typically measured in BTUs (British Thermal Units) per hour, and US Stove furnaces often offer heating capacities that range from 80,000 to 180,000 BTUs or more.
- Combustion System
One of the key technical aspects of these furnaces is their combustion system. US Stove furnaces utilize advanced combustion technology to optimize fuel efficiency and reduce emissions. The two primary types of combustion systems used are non-catalytic and catalytic:
Non-Catalytic: Non-catalytic models use a secondary air supply to burn off combustion by-products. This system is known for its reliability and ease of use.
Catalytic: Catalytic models incorporate a catalytic converter to enhance combustion. They are highly efficient and tend to produce fewer emissions.
- Fuel Source
US Stove Company wood burning furnaces are designed to burn a variety of wood fuels, including seasoned hardwoods like oak, maple, and hickory. Properly seasoned wood, with a moisture content of 20% or less, is recommended to ensure efficient and clean combustion.
- Installation
Proper installation of a wood burning furnace is critical for safety and performance. Some technical aspects to consider during installation include:
Ventilation: Adequate ventilation and a well-constructed flue system are essential to ensure proper air supply and safe exhaust of combustion gases.
Clearances: Maintain the recommended clearances between the furnace and combustible materials as specified by the manufacturer and local building codes.
Ductwork: US Stove Company furnaces are often designed to integrate with existing ductwork systems for efficient heat distribution.
Chimney: The chimney should be properly installed and well-maintained to ensure effective venting.
- Maintenance
Regular maintenance is crucial to keep the US Stove Company wood burning furnace operating efficiently. Some maintenance tasks include:
Cleaning the firebox and heat exchanger regularly to remove ash and soot buildup.
Inspecting and replacing gaskets, door seals, and worn components as needed to maintain a proper seal.
Scheduling professional inspections to ensure safe and efficient operation.
- Compliance with Regulations
Always ensure that your installation and use of a wood burning furnace comply with local building codes and regulations. Different areas may have specific requirements regarding furnace installation, clearances, and safety features.
Conclusion
The US Stove Company wood burning furnace is a reliable and efficient heating solution for larger spaces. Understanding its technical specifications, combustion systems, fuel requirements, and proper installation and maintenance is crucial for both safety and performance. Compliance with local regulations further enhances the safety and functionality of these wood burning furnaces. Whether you’re technically inclined or not, these technical insights will help you make an informed choice when considering a US Stove Company wood burning furnace for your heating needs.