The Upland 207 Wood Burning Stove is a popular choice among those seeking efficient heating solutions and the ambiance of a wood-burning fire. In this article, we will provide a comprehensive technical review and user guide for the Upland 207 wood stove. Whether you are a seasoned wood stove enthusiast or a first-time user, this information will help you understand its technical details and ensure safe and efficient operation.
Technical Specifications
The Upland 207 is a high-quality wood burning stove designed for both heating and aesthetic purposes. Its technical specifications include:
Heating Capacity: The Upland 207 can heat an area of up to 2,000 square feet, making it suitable for most living spaces and cabins.
BTU Output: This stove has an impressive BTU output range of 18,000 to 70,000, allowing for efficient heat production and control.
EPA Certified: It meets Environmental Protection Agency (EPA) emission standards, ensuring that it burns wood efficiently and reduces environmental impact.
Firebox Size: The stove’s firebox can accommodate logs up to 18 inches in length, reducing the need for frequent reloading.
Efficiency: With an efficiency rating of 85%, the Upland 207 ensures that the majority of the heat generated is used to warm your space.
Burn Time: The stove offers a burn time of up to 8 hours on a single load of wood, making it convenient for overnight heating.
Installation
Proper installation is essential for the safe and effective use of the Upland 207 Wood Burning Stove. Here are the key installation steps:
Clearance: Maintain the recommended clearances from combustible materials, walls, and ceilings as specified in the manufacturer’s manual.
Chimney: Ensure a properly designed and installed chimney system. It should meet local building codes and be constructed with appropriate materials.
Flue Pipe: Use only high-quality, insulated flue pipes to connect the stove to the chimney. It’s crucial to maintain the right clearances and adhere to local regulations.
Ventilation: Provide adequate room ventilation to ensure proper combustion and prevent the build-up of carbon monoxide. Follow local building codes for ventilation requirements.
Operation
To operate the Upland 207 wood stove effectively and safely, follow these guidelines:
Fuel Selection: Use only well-seasoned hardwoods like oak, maple, or hickory. Avoid burning green or treated wood.
Loading: Load the stove with wood to its specified capacity, and avoid overloading, which can reduce efficiency.
Air Control: Adjust the air intake to control the burn rate. A lower setting is suitable for maintaining a steady heat output, while a higher setting provides more heat.
Ash Management: Regularly remove ashes to maintain optimal airflow and efficiency.
Maintenance
Regular maintenance ensures your Upland 207 wood stove continues to perform optimally:
Chimney Cleaning: Clean the chimney annually to remove creosote buildup, which can cause chimney fires.
Gasket Inspection: Check the door gasket for wear and replace it if necessary to maintain an airtight seal.
Firebrick Inspection: Inspect and replace damaged firebricks as needed to protect the stove’s interior.
Conclusion
The Upland 207 Wood Burning Stove is a reliable and efficient heating solution for both technical and non-technical users. With the right installation, operation, and maintenance, you can enjoy the warmth and comfort it provides while minimizing its environmental impact. Remember to consult the manufacturer’s manual and local building codes for specific guidelines related to your location, and always prioritize safety when using any wood-burning appliance.