The Englander Wood Furnace 28-3500 is a powerful heating appliance designed to provide efficient and reliable warmth for your home. In this comprehensive technical review, we’ll delve into the details of this wood-burning stove, exploring its specifications, proper operation, and important technical aspects. Whether you’re a seasoned stove enthusiast or a newcomer to wood heating, this article aims to provide you with clear and concise information.
Specifications
The Englander Wood Furnace 28-3500 is a notable addition to the Englander stove lineup, known for its quality and performance. Here are the key specifications:
Heating Capacity: The 28-3500 model is capable of heating areas up to 3,500 square feet, making it suitable for a wide range of home sizes.
BTU Output: It boasts an impressive maximum BTU output of 152,000, which ensures efficient and powerful heating.
Firebox Size: The unit features a substantial firebox, accommodating logs of up to 22 inches in length.
EPA Certified: The 28-3500 meets Environmental Protection Agency (EPA) certification standards, meaning it meets strict emissions and efficiency criteria.
Blower Included: A blower is integrated, enhancing heat distribution and circulation throughout your living space.
Fuel Type: Designed for use with wood, it offers an excellent alternative to traditional heating methods.
Efficiency: This model boasts an impressive efficiency rate of 85%, ensuring that more of the heat generated is delivered into your home.
Proper Operation
To make the most of your Englander Wood Furnace 28-3500, it’s crucial to follow proper operating procedures. Here’s a step-by-step guide:
Preparing the Firebox: Start by cleaning the firebox of any ash and debris from the previous use. Ensure proper ventilation by opening the damper.
Loading Wood: Insert seasoned hardwood logs into the firebox, making sure not to overload it. Proper air circulation is essential for efficient combustion.
Lighting the Fire: Ignite the wood using newspaper or fire starters, and allow the fire to establish itself. Once the fire is burning well, close the door.
Controlling the Airflow: Regulate the stove’s temperature and burn rate by adjusting the primary and secondary air controls. Experiment with settings to find the right balance for your heating needs.
Using the Blower: The integrated blower enhances heat distribution. It’s advisable to switch it on once the fire is established and producing a consistent heat output.
Maintenance: Regularly clean the ash pan and chimney, and inspect gaskets and seals for wear. Proper maintenance ensures safety and efficiency.
Technical Considerations
For those who appreciate the technical details, here are some key aspects to be aware of:
Catalytic Combustion: The Englander 28-3500 utilizes catalytic combustion technology to increase efficiency and reduce emissions. This technology aids in the secondary burn of gases and particulates.
Air Wash System: The stove is equipped with an air wash system that keeps the glass clean by directing a stream of air across it. This ensures a clear view of the fire.
Burn Time: The stove’s burn time largely depends on the quality of wood and loading. On average, it can provide heat for 8 to 10 hours on a single load of wood.
Clearances: Ensure that the stove is installed with the recommended clearances to combustibles as specified in the manual.
Conclusion
The Englander Wood Furnace 28-3500 is a high-quality wood-burning stove that offers efficient and reliable home heating. With an understanding of its specifications, proper operation, and technical details, you can make the most of this heating appliance. Whether you’re looking to reduce your carbon footprint, enjoy the warmth of a wood fire, or both, the 28-3500 model is a reliable choice for heating your home. By following the guidelines and technical considerations outlined in this review, you can stay warm and cozy while efficiently using this wood stove.