The Timberline wood stove is a reliable and efficient heating solution for your home. This installation manual provides clear and accurate technical details to guide you through the proper installation of your Timberline wood stove. Whether you’re an experienced installer or a first-time user, this guide ensures that you set up your stove safely and effectively.
Important Note: It’s crucial to follow local building codes and regulations when installing a wood stove. For safety and compliance, consider professional inspection of your installation.
- Gather the Necessary Tools and Materials
Before you start the installation process, ensure you have the following tools and materials:
- Timberline wood stove
- Stovepipe
- Chimney
- Hearth or floor protection
- Wall thimble (if passing through a wall)
- Roof flashing
- Storm collar
- Chimney cap
- Support brackets
- Fireproof mortar or high-temperature sealant
- Appropriate fasteners (screws, anchors, etc.)
- Choosing the Location
Selecting the right location for your Timberline wood stove is crucial. Consider the following:
Ensure that the stove is positioned at least 36 inches away from combustible materials, such as walls, furniture, or curtains.
Install a non-combustible hearth or floor protection under the stove, extending a minimum of 18 inches in front of the stove and 8 inches on each side.
Make sure the stove is centrally located for even heat distribution.
- Connecting the Stove to the Chimney
The stovepipe connects the Timberline wood stove to the chimney. Here are the steps:
Attach the chimney connector to the stove’s flue collar, following the manufacturer’s instructions.
Install the stovepipe, ensuring that it maintains a slight upward slope towards the chimney (approximately 1/4-inch rise per foot).
Secure all connections with appropriate fasteners and follow clearances as specified in the Timberline manual.
- Passing Through Walls and Roof
If your installation requires passing through walls or the roof, follow these steps:
Use a wall thimble for wall penetration. Make sure it maintains the required clearances.
For roof penetration, use flashing to create a watertight seal around the chimney. A storm collar should be placed above the flashing to provide added protection.
- Installing the Chimney
Proper chimney installation is crucial for safe and efficient operation:
The chimney should extend at least 2 feet above the highest point where it exits the roof and 3 feet above the highest point within a 10-foot radius.
If the chimney passes through unheated spaces, insulate it to prevent creosote buildup.
- Securing the Chimney
Use support brackets to secure the chimney in place. The number of brackets and their placement should align with the manufacturer’s instructions.
- Finishing Touches
To complete the installation:
Install a chimney cap on top of the chimney to prevent rain, debris, and animals from entering.
Perform a final inspection to ensure that all components are correctly installed and securely fastened.
Apply fireproof mortar or high-temperature sealant to any joints or seams as required.
- Final Inspections and Safety
Before using your Timberline wood stove, consider having your installation inspected by a certified professional to ensure it complies with local codes and regulations. Also, remember to install a smoke detector and a carbon monoxide alarm in the vicinity of the stove for added safety.
Conclusion
Proper installation of your Timberline wood stove is essential for both safety and efficient heating. Following this guide and the manufacturer’s instructions will help you set up your stove correctly. Adhere to local regulations, and consider professional inspection to ensure a safe and compliant installation. With the Timberline wood stove, you can enjoy a warm and cozy environment in your home while maintaining peace of mind regarding safety and performance.