The Rohn wood burning stove is a reliable and efficient heating solution that has gained popularity among homeowners. In this technical guide, we’ll delve into the specifics of the Rohn wood burning stove, offering clear and concise information that is accessible to both technical enthusiasts and those new to wood stoves.
1. Combustion Process
Understanding the combustion process is fundamental when operating the Rohn wood burning stove. The key components include:
Fuel Type: The Rohn stove is designed to burn seasoned firewood, preferably hardwood, with a moisture content of 20% or less for optimal efficiency and reduced creosote buildup.
Air Supply: The stove is equipped with air controls that allow you to regulate the flow of oxygen into the combustion chamber, influencing the rate of combustion. Adjusting the air supply is crucial for controlling the heat output.
Combustion Chamber: The combustion chamber is lined with firebrick to withstand high temperatures, ensuring durability and efficient heat transfer.
2. Heat Output
The heat output of the Rohn wood burning stove is determined by several factors, including the stove’s size, design, and combustion efficiency. This output is usually measured in British Thermal Units (BTUs). Select a stove with an appropriate heat output for your space, avoiding overloading to prevent overheating.
3. Installation
Proper installation of the Rohn wood burning stove is essential for both safety and performance. Here’s what you need to consider:
Clearances: Maintain the recommended clearances from combustible materials as specified by the manufacturer. This typically requires a minimum of 36 inches of clearance from adjacent walls and furniture.
Chimney: Ensure a well-maintained chimney for proper venting. Regular cleaning and inspections are necessary to prevent the buildup of creosote, which can lead to chimney fires.
Floor Protection: Stove installations often require a non-combustible floor protector to shield the flooring from excessive heat. Verify that the protector meets local building codes.
4. Maintenance
Proper maintenance of the Rohn wood burning stove ensures longevity and efficiency. Routine tasks include:
Cleaning: Regularly remove ashes from the firebox and clean the glass door for a clear view of the flames.
Gaskets and Seals: Check and replace gaskets and seals as needed to maintain a tight seal on the doors, preventing air leaks.
Inspections: Periodically inspect the stove for cracks, loose bolts, or any signs of wear and tear. Address any issues promptly to prevent further damage.
5. Efficiency and Emissions
The Rohn wood burning stove is designed to be efficient and produce fewer emissions. It may include features such as secondary combustion systems to burn unburned gases, enhancing efficiency and reducing environmental impact.
6. Safety Precautions
Safety should be a top priority when using the Rohn wood burning stove:
Always have a fire extinguisher readily available.
Install a carbon monoxide (CO) detector in the same room to ensure early detection of any harmful emissions.
Maintain a safe distance from the stove and use appropriate protective gear when handling hot components.
Follow the manufacturer’s instructions for safe operation.
Conclusion
The Rohn wood burning stove offers a reliable and efficient heating solution. Understanding the technical aspects of this stove is essential for safe and efficient operation. By following the guidelines presented in this article, you can enjoy the warmth and comfort provided by the Rohn wood burning stove while minimizing risks and maximizing its performance.