The Napoleon 1100CP-1 Cast-Iron Wood Burning Stove is a remarkable heating appliance known for its efficiency, reliability, and classic design. In this article, we’ll delve into the technical details of this stove, including its key features, installation requirements, maintenance guidelines, and safety considerations. Whether you’re a seasoned stove enthusiast or a first-time user, this article will provide essential information to ensure the successful operation of the Napoleon 1100CP-1.
Key Features and Technical Specifications
Heating Capacity: The Napoleon 1100CP-1 has a heating capacity of up to 55,000 BTUs (British Thermal Units) per hour. This means it can effectively heat spaces up to 1,600 square feet.
Efficiency: This cast-iron stove boasts an impressive 77% efficiency rating, which means it effectively converts wood fuel into heat while minimizing heat loss.
Emissions: It meets strict emissions standards, with a low particulate emission rate of 4.3 grams per hour. This makes it an environmentally friendly choice.
Burn Time: The stove offers a long burn time of up to 8 hours, reducing the need for frequent reloading.
Firebox Capacity: The large firebox can accommodate logs up to 18 inches in length, allowing for extended burn periods and reduced maintenance.
Installation Requirements
Proper installation is essential for safe and efficient operation. Follow these technical details for the installation of the Napoleon 1100CP-1:
Clearances: Maintain clearances as per the manufacturer’s recommendations. For this stove, you should have a minimum clearance of 20 inches to combustible materials on the sides and 18 inches to combustibles at the back. For non-combustible surfaces, a 2-inch clearance is sufficient.
Chimney and Venting: Ensure your chimney meets local building codes and requirements. The Napoleon 1100CP-1 requires a 6-inch flue for venting. A proper chimney liner is often recommended for optimal draft and safety.
Hearth Pad: Place the stove on a non-combustible hearth pad that extends at least 8 inches beyond the stove’s front and sides and 16 inches in front.
Room Size: Consider the room size and layout when choosing the location for your stove. Adequate space for proper clearances is crucial.
Maintenance Guidelines
Regular maintenance is essential to ensure the Napoleon 1100CP-1 operates efficiently and safely. Here are key maintenance tasks:
Cleaning: Clean the stove’s interior, including the firebox, ash pan, and glass, regularly to prevent creosote buildup and maintain optimal efficiency.
Gaskets: Inspect the door gaskets for wear and tear. Replace them if necessary to maintain an airtight seal.
Ash Disposal: Safely dispose of ashes in a metal container with a tight-fitting lid, away from combustible materials.
Chimney Inspection: Have your chimney inspected and cleaned annually by a professional to ensure proper venting and safety.
Safety Considerations
Fireplace Screen: Use a fireplace screen to prevent sparks and embers from escaping the stove and entering your living space.
Carbon Monoxide Detector: Install a carbon monoxide detector in your home to ensure safety in case of a malfunction.
Fire Extinguisher: Keep a fire extinguisher nearby for added safety.
Conclusion
The Napoleon 1100CP-1 Cast-Iron Wood Burning Stove is a technical marvel known for its heating efficiency and classic design. Proper installation, regular maintenance, and adherence to safety guidelines are paramount to enjoying the benefits of this appliance. Whether you’re looking to reduce your heating costs or add a touch of warmth and charm to your living space, the Napoleon 1100CP-1 offers a reliable and efficient heating solution for both technical and non-technical users alike.