The Buck Stove Model 91: A Technical Review

The Buck Stove Model 91 is a highly regarded catalytic wood-burning stove, known for its exceptional performance and reliability. In this article, we’ll delve into the technical details of the Buck Stove Model 91, its proper operation, and maintenance. Whether you’re a seasoned wood stove enthusiast or new to wood heating, this article provides accurate and concise information.

Technical Specifications of the Buck Stove Model 91

1. Catalytic Combustion:
2. The Buck Stove Model 91 employs a catalytic combustion system. It utilizes a catalytic converter to increase combustion efficiency, resulting in cleaner and more efficient burning of wood.

3. Heating Capacity:
4. This stove is designed to heat spaces efficiently. The Model 91 can provide up to 2,400 square feet of heated space, making it suitable for both small and large areas.

5. Heat Output:
6. With a maximum heat output of approximately 55,000 BTUs per hour, this stove is capable of maintaining a comfortable and consistent temperature.

7. Burn Time:
8. The stove’s burn time can extend up to 8 hours on a single load of wood, minimizing the need for frequent refueling.

9. Emissions:
10. The Buck Stove Model 91 is EPA-certified, ensuring it meets strict emission standards, resulting in a cleaner and more environmentally friendly combustion process.

Proper Operation of the Buck Stove Model 91

1. Fuel Selection:
2. Utilize seasoned hardwood with a moisture content of around 20% or less. Properly seasoned wood burns cleaner, minimizing creosote buildup and ensuring efficient combustion.

3. Loading Wood:
4. Place wood inside the stove’s firebox, allowing for sufficient air circulation. Avoid overloading the stove, as this can impede proper combustion.

5. Catalytic Converter Management:
6. The catalytic converter needs regular maintenance. Clean it periodically, as outlined in the stove’s manual, to maintain optimal efficiency.

7. Air Control:
8. The Model 91 comes with primary and secondary air controls. Adjust these controls as needed to regulate the stove’s temperature and burn rate.

9. Safety Precautions:
10. Ensure that the stove is installed with proper clearances and in compliance with local regulations. Keep flammable materials away from the stove.

Maintenance of the Buck Stove Model 91

1. Chimney Maintenance:
2. Regularly inspect and clean the chimney to prevent creosote buildup, which can lead to chimney fires. Follow local safety standards and regulations.

3. Gasket Inspection:
4. Check the door gasket for any signs of wear and tear. Replace it if it is damaged to maintain an airtight seal.

5. Annual Servicing:
6. Consider an annual professional inspection and servicing to ensure your stove continues to operate efficiently and safely.

Conclusion

The Buck Stove Model 91 is a reliable and efficient wood-burning stove. With its catalytic combustion system, it offers a clean and efficient way to heat your space. By following the proper operation and maintenance guidelines, you can enjoy the warmth and comfort of the Model 91 while also ensuring its longevity and safety.