Scherer Stove & Chimney is a well-established name in the world of wood-burning stoves, offering a wide range of products designed to provide efficient and environmentally friendly heating solutions. In this review, we’ll delve into the technical details of Scherer stoves, their proper operation, and key maintenance considerations.
Technical Details:
EPA-Certified Stoves: Scherer Stove & Chimney specializes in EPA-certified wood-burning stoves. These stoves meet stringent emission and efficiency standards, ensuring minimal environmental impact and efficient wood consumption.
Heating Capacity: Scherer stoves come in various sizes, with heating capacities suitable for small rooms to large living spaces. The heating capacity typically ranges from 1,000 to 3,000 square feet.
Burn Time: The burn time of Scherer stoves varies depending on the model and the type of wood used. However, most stoves offer a burn time of 6 to 12 hours on a single load of wood, making them highly efficient.
Heat Output: These stoves produce a range of heat outputs, often measured in British Thermal Units (BTUs) per hour. The heat output can vary from 25,000 to 100,000 BTUs, depending on the specific stove model.
Combustion Technology: Scherer stoves incorporate advanced combustion technology, including secondary and tertiary combustion chambers. This technology maximizes heat production and minimizes emissions.
Proper Operation:
Installation: Proper stove installation is crucial. Follow the manufacturer’s guidelines and local building codes to ensure safe and efficient placement. Adequate clearances from combustible materials are essential.
Seasoned Firewood: Always burn seasoned firewood with a moisture content of around 20% or lower. Dry wood burns cleaner, produces less creosote, and maximizes stove efficiency.
Lighting the Stove: To start a fire, use kindling and small logs. Gradually build the fire by adding larger logs. Keep the stove’s air controls fully open during the ignition phase.
Air Control: Scherer stoves typically have primary and secondary air controls. The primary control adjusts the burn rate, while the secondary control enhances combustion efficiency. Learn to use these controls effectively for optimal performance.
Regular Cleaning: Remove ashes regularly from the stove’s firebox. A shallow bed of ash can insulate coals and reduce heat output and efficiency.
Maintenance Tips:
Chimney Cleaning: Regularly inspect and clean the chimney to prevent creosote buildup, which can lead to chimney fires. A clean chimney ensures proper draft and safety.
Gasket Maintenance: Check and replace door and glass gaskets if they are damaged or worn out. Proper seals ensure an airtight combustion chamber.
Glass Cleaning: Keep the glass clean for a clear view of the fire. Use a specialized glass cleaner to remove soot and creosote buildup.
Overall Inspection: Periodically inspect the stove for any signs of wear or damage, such as cracks in the firebox or chimney. Address these issues promptly to maintain safety and efficiency.
Maintain a Carbon Monoxide Detector: Install a carbon monoxide detector in the same room as your wood stove to monitor indoor air quality and ensure safety.
In conclusion, Scherer Stove & Chimney offers a range of efficient and eco-friendly wood-burning stoves. By understanding their technical details, adhering to proper operation guidelines, and following essential maintenance tips, you can enjoy a warm and safe environment while getting the most out of these high-quality stoves.