Introduction
The Resolute Wood Stove is a popular choice for those seeking efficient and reliable home heating. This article serves as a comprehensive manual, detailing the technical aspects, operation, and maintenance of the Resolute Wood Stove. Whether you’re an experienced user or a first-time owner, this guide will provide you with essential information for proper exploitation and optimal performance.
Technical Specifications
1. Dimensions and Weight:
- Dimensions: The Resolute Wood Stove typically measures 25.75" H x 20" W x 20.75" D.
- Weight: It weighs approximately 328 lbs.
2. Heating Capacity:
- The Resolute Wood Stove is designed to heat areas of up to 1,600 square feet.
3. Fuel Type:
- This stove is compatible with seasoned hardwoods such as oak, maple, and cherry.
Operation
1. Lighting the Stove:
- Open the door and ensure the air control lever is fully open.
- Place crumpled newspaper or fire starters on the firebox floor.
- Add small pieces of dry kindling on top of the paper.
- Light the paper or starter.
- Once the kindling is burning well, add larger split logs to the firebox.
2. Controlling the Airflow:
- The air control lever allows you to regulate the airflow. Pushing it in reduces air supply, while pulling it out increases it.
- For maximum heat, close the air control lever when the stove is burning efficiently, and open it when you need a longer burn time.
3. Cleaning and Maintenance:
- Regularly remove ashes from the ash pan to maintain proper airflow.
- Inspect the firebricks and replace any damaged ones.
- Clean the glass door when cool, using a suitable glass cleaner.
- Check and clean the chimney and flue regularly.
Safety Guidelines
- Ensure the stove is installed on a non-combustible surface with proper clearance from walls and other materials.
- Use a fireproof hearth rug or pad to protect the flooring around the stove.
- Install a quality carbon monoxide detector in the vicinity of the stove.
- Always use a fireplace screen or glass door to prevent sparks and embers from escaping.
Troubleshooting
1. Insufficient Heat:
- Check the air control lever; it may be closed too much.
- Verify the wood is well-seasoned and dry.
- Ensure there’s adequate draft in the chimney.
2. Excessive Smoke:
- Check for a blockage in the chimney or flue.
- Make sure the wood is sufficiently dry.
3. Glass Door Gets Dirty Quickly:
- Burning unseasoned wood or using the stove with a low burn rate can cause a dirty glass door. Burn seasoned wood and adjust the air control as needed.
Conclusion
The Resolute Wood Stove is a reliable and efficient heating solution when operated and maintained correctly. Understanding its technical details, proper operation, and safety guidelines are essential for a safe and enjoyable experience. Regular maintenance, correct fuel usage, and safety precautions will ensure your Resolute Wood Stove serves you well for years to come.