Jotul wood burning stoves are renowned for their quality and efficiency. In this guide, we’ll provide you with accurate and clear instructions on how to use a Jotul wood burning stove, catering to both technical and non-technical users. Whether you’re new to wood stoves or an experienced user, this article will help you make the most of your Jotul stove.
Understanding Your Jotul Wood Burning Stove
Primary and Secondary Air Controls:
- Jotul stoves typically have two air controls: primary and secondary. The primary control regulates the amount of air entering the firebox, while the secondary control manages air for reburning gases. Familiarize yourself with these controls before use.
Catalytic Combustor (if applicable):
- Some Jotul stoves have a catalytic combustor. This device helps to increase combustion efficiency. Be aware if your stove is equipped with one, as it may require maintenance.
Proper Operation of Your Jotul Wood Burning Stove
Fuel Selection:
- Use seasoned hardwood with a moisture content of around 20% or less. Dry wood burns cleanly and efficiently. Avoid softwoods and treated wood.
Loading Wood:
- Place wood in the firebox, ensuring there’s enough space for air to circulate. Avoid overloading, as it can hinder proper combustion.
Air Control Settings:
- Start with both primary and secondary air controls fully open when lighting the stove. Once a good fire is established, adjust these controls to regulate the burn rate and heat output. Experiment to find the right balance for your needs.
Ash Pan Maintenance:
- Regularly empty the ash pan to ensure proper air circulation. A layer of ash on the grate can affect combustion.
Safety Precautions:
- Maintain adequate clearance around the stove to prevent the risk of fires. Install heat shields if necessary and follow local safety regulations.
Maintenance of Your Jotul Wood Burning Stove
Glass Cleaning:
- Jotul stoves usually have airwash systems to help keep the glass clean. Clean the glass as needed to maintain a clear view of the fire.
Catalytic Combustor Maintenance (if applicable):
- If your stove has a catalytic combustor, follow the manufacturer’s recommendations for cleaning and maintenance. This can significantly affect stove performance.
Chimney Inspection:
- Regularly inspect and clean the chimney to prevent creosote buildup, which can pose a fire hazard.
Gasket Inspection:
- Check the door gasket for signs of wear or damage. Replace it if needed to maintain an airtight seal.
Conclusion
Using a Jotul wood burning stove can be a rewarding experience when done correctly. By understanding your stove’s components, following proper operation guidelines, and conducting routine maintenance, you can enjoy efficient heating and a cozy atmosphere. Remember to prioritize safety and adhere to local regulations to ensure a safe and enjoyable experience with your Jotul wood burning stove.