The Hot Blast Wood Furnace 1357 is a versatile and efficient heating solution for both homes and workshops. In this article, we’ll provide a comprehensive technical review and user guide for this wood-burning stove. Whether you’re an experienced stove user or a newcomer to wood heating, this article aims to provide clear and concise information to help you make the most of this appliance.
Technical Specifications
The Hot Blast Wood Furnace 1357 boasts a range of impressive technical specifications:
Heating Capacity: This furnace can efficiently heat spaces of up to 2,500 square feet, making it suitable for a wide range of applications.
Burn Time: With its large firebox, the 1357 can burn for up to 8 hours, reducing the need for constant refueling.
BTU Output: It has an output of 153,000 BTUs, ensuring that your space stays warm and comfortable even in the coldest of winters.
Efficiency: The 1357 is designed for maximum efficiency, with an efficiency rating of 75%. This means it can convert a significant portion of the wood’s energy into heat for your space.
EPA Certified: This furnace is EPA (Environmental Protection Agency) certified, meaning it meets strict emissions standards, reducing its environmental impact.
Installation
Installing the Hot Blast Wood Furnace 1357 should be done by a professional unless you are confident in your abilities. Proper installation is crucial to ensure both safety and efficiency. Here are some key installation considerations:
Clearances: Ensure proper clearances to combustibles. The furnace should be placed at least 18 inches away from walls and other flammable materials.
Chimney Installation: A well-functioning chimney is essential. It should be professionally installed, with the correct height and diameter to optimize draft and minimize creosote buildup.
Fireproof Flooring: The furnace should sit on a fireproof surface, typically a non-combustible hearth.
Flue Connection: Connect the furnace to the chimney using proper flue pipes and maintain the correct slope for efficient venting.
Operation
The operation of the Hot Blast Wood Furnace 1357 is straightforward but requires careful attention to ensure safety and efficiency:
Loading: Use seasoned hardwood for the best results. Fill the firebox, but avoid overloading it, as this can reduce airflow and efficiency.
Air Control: Adjust the air controls to regulate the burn rate. A primary air intake controls the combustion, while a secondary air intake helps burn off gases.
Ash Management: Regularly remove ashes from the ash pan to maintain efficient combustion. Ash buildup can reduce airflow.
Temperature Control: Use the built-in thermostat to control the desired temperature in your space. This helps maintain a comfortable and consistent heat level.
Safety Tips
Safety should always be a top priority when using wood-burning stoves. Here are some essential safety tips:
Install Smoke and Carbon Monoxide Detectors: Ensure that your space is equipped with functioning smoke and carbon monoxide detectors.
Regular Maintenance: Schedule annual maintenance checks by a professional to keep your furnace in peak condition.
Children and Pets: Keep children and pets at a safe distance from the stove, as it can become extremely hot during operation.
Quality Fuel: Only burn seasoned, dry wood. Green or unseasoned wood can lead to creosote buildup and decreased efficiency.
Conclusion
The Hot Blast Wood Furnace 1357 is a robust and efficient wood-burning stove designed to provide reliable heating for your home or workshop. By understanding its technical specifications and following proper installation, operation, and safety guidelines, you can enjoy a warm and cozy environment throughout the colder months. Always prioritize safety and responsible wood burning practices when using this or any wood stove.