If you’re in the market for a wood-burning stove, the Fisher Papa Bear is a legendary choice known for its reliability and heating efficiency. In this article, we’ll provide you with the essential technical details of the Fisher Papa Bear Wood Stove.
Overview
The Fisher Papa Bear Wood Stove has been a favorite among heating enthusiasts for decades. It’s renowned for its durability, simplicity, and ability to efficiently heat homes. Let’s dive into the technical specifics:
Dimensions and Weight
- Height: Approximately 31 inches
- Width: Around 32 inches
- Depth: Roughly 21 inches
- Weight: Typically weighs between 400 to 500 pounds
Heating Capacity
The Fisher Papa Bear is designed to efficiently heat spaces up to approximately 1,500 square feet. It’s important to note that the actual heating capacity may vary depending on factors such as the quality of the wood, the insulation of your space, and the stove’s maintenance.
Material and Construction
The Fisher Papa Bear Wood Stove is constructed primarily of cast iron, which provides excellent heat retention and durability. The cast iron construction allows the stove to radiate heat even after the fire has burnt down, making it an efficient heating source.
Burn Time
The burn time of the Fisher Papa Bear stove depends on the type of wood used and the damper settings. In general, you can expect it to burn for approximately 6 to 8 hours with a well-seasoned hardwood like oak. It’s important to understand that burn times can vary.
Installation
Proper installation of the Fisher Papa Bear is essential for its safety and performance. It should be placed on a non-combustible surface and positioned according to manufacturer guidelines to ensure clearances are met. Installation should always be done in compliance with local building codes and regulations.
Clearances
Maintaining adequate clearances is crucial for safety. As a general guideline:
- Front and Rear Clearance: At least 18 inches from any combustible material.
- Side Clearance: A minimum of 24 inches from any combustible surface.
- Single Wall Stovepipe Clearance: At least 18 inches from any combustible material.
- Chimney Connector Clearance: Typically, a minimum of 18 inches from combustibles.
However, these clearances can vary based on local building codes and the specific installation configuration. Always consult the manufacturer’s guidelines and local regulations for precise clearance requirements.
Venting
The Fisher Papa Bear Wood Stove requires proper venting through a well-insulated chimney. It’s advisable to use a Class A chimney pipe, which is insulated and designed for wood stoves. Ensure the chimney is professionally installed and regularly inspected for safety.
Maintenance
Routine maintenance is essential to keep your Fisher Papa Bear performing at its best. This includes:
- Cleaning the Chimney: Regularly remove creosote buildup from the chimney to prevent chimney fires.
- Ash Removal: Empty the ash pan as needed to maintain efficient airflow.
- Gasket Inspection: Check the door gaskets and replace them if they show signs of wear.
Conclusion
The Fisher Papa Bear Wood Stove is a timeless choice for those seeking efficient and reliable wood heating. By understanding its technical specifications and adhering to proper installation and maintenance, you can enjoy its warmth and charm while ensuring safety and performance for years to come.