The Englander 32-NC Wood Stove is a popular choice for those seeking an efficient and reliable heating source. In this article, we’ll provide an accurate and concise technical overview of the Englander 32-NC Wood Stove, offering insights into its features, specifications, and best practices for optimal use.
Key Features and Specifications
The Englander 32-NC Wood Stove boasts several features and specifications that make it a top choice for wood stove enthusiasts:
Heating Capacity: The Englander 32-NC can heat spaces up to 1,800 square feet, making it suitable for a wide range of room sizes.
Heat Output: With a maximum heat output of 60,000 BTUs per hour, this stove is highly efficient in keeping your living space warm and comfortable.
Firebox Size: The stove’s firebox can accommodate logs up to 18 inches in length, allowing for extended burn times.
Efficiency: This stove is EPA certified and offers a high efficiency rating of over 75%. It means that it maximizes the heat generated from the wood and minimizes emissions.
Air Wash System: The air wash system helps keep the glass door clean, providing a clear view of the fire and maintaining a cozy ambiance.
Ash Pan: The included ash pan simplifies ash removal and cleaning, making maintenance more manageable.
Catalytic Combustor: The stove features a catalytic combustor, enhancing combustion efficiency and reducing emissions. It also enables longer burn times.
Proper Installation
To ensure safe and efficient operation of the Englander 32-NC Wood Stove, follow these installation guidelines:
Clearances: Maintain proper clearances from combustible materials. The specific clearance requirements can be found in the stove’s manual and local building codes.
Chimney Installation: A well-constructed chimney is essential for proper venting. The chimney should be inspected and cleaned regularly to prevent creosote buildup.
Floor Protection: Use non-combustible materials like tile or a hearth pad to protect the floor beneath the stove.
Stovepipe: Connect the stove to the chimney using a double-wall stovepipe that complies with local regulations.
Fireproof Wall: If the stove is close to a combustible wall, it’s recommended to install a fireproof wall shield to protect the area.
Operation and Maintenance
Proper operation and maintenance are key to getting the most out of your Englander 32-NC Wood Stove:
Seasoned Wood: Burn only well-seasoned, dry wood with a moisture content below 20%. This reduces creosote buildup and maximizes efficiency.
Air Control: Learn how to control the stove’s air intake to optimize combustion and heat output. Refer to the manual for guidance.
Regular Cleaning: Keep the stove and chimney clean by removing ash and creosote buildup as needed.
Catalytic Combustor: Monitor and maintain the catalytic combustor according to the manufacturer’s instructions.
Carbon Monoxide Detector: Install a carbon monoxide detector in the room to ensure indoor air quality.
Conclusion
The Englander 32-NC Wood Stove is a dependable and efficient heating solution. Understanding its features, specifications, and proper installation and maintenance procedures is essential for safe and effective operation. By following these guidelines, you can enjoy the warmth and ambiance this wood stove provides while ensuring the safety of your home. Always consult the manufacturer’s manual for specific instructions and seek professional assistance if needed during installation or maintenance.