Introduction:
The Englander pellet stove is renowned for its reliability and efficiency in heating spaces. Proper maintenance is crucial to ensure the longevity and optimal performance of your stove. One common maintenance task is the removal and cleaning of the auger. This guide will provide clear and concise instructions on how to efficiently remove the auger from your Englander pellet stove.
Before You Begin:
Ensure the stove is completely cool before attempting any maintenance. Disconnect the power supply to prevent accidents. Have the necessary tools ready, including a screwdriver, pliers, and a flashlight for better visibility.
Step 1: Accessing the Auger Assembly
Remove the Hopper: Start by emptying the hopper of any remaining pellets. Locate and remove any screws or bolts securing the hopper to the stove body.
Detach the Side Panels: Carefully remove the side panels of the stove. The screws holding the panels in place may vary, so refer to your stove’s manual for specific instructions.
Locate the Auger Assembly: Once the side panels are removed, locate the auger assembly. The auger is a corkscrew-like device responsible for feeding pellets into the combustion chamber.
Step 2: Disconnecting the Auger Motor
Unplug the Stove: Before proceeding, unplug the stove from the power source to ensure safety.
Identify the Auger Motor: Locate the auger motor connected to the auger assembly. It is typically situated near the bottom of the stove.
Disconnect Wires: Carefully disconnect the wires connected to the auger motor. Note the wire placement for reconnection during reassembly.
Step 3: Removing the Auger
Release Tension: If your stove has a tensioning system for the auger, release it to reduce tension on the auger.
Loosen Set Screws: Using the appropriate tool, loosen any set screws securing the auger to the motor shaft.
Remove Auger from Motor: Gently pull or twist the auger to disconnect it from the motor shaft. Be cautious not to damage the auger or the motor during this process.
Step 4: Cleaning and Inspection
Inspect the Auger: Check the auger for any signs of wear, damage, or blockages. Clean the auger thoroughly using a soft brush or compressed air.
Examine Motor Components: Inspect the motor components for any debris or obstruction. Wipe down the motor with a dry cloth.
Step 5: Reassembly
Reattach the Auger: Carefully reconnect the auger to the motor shaft and secure it in place with the set screws.
Reconnect Wires: Reconnect the wires to the auger motor, ensuring they are securely attached.
Reassemble the Stove: Reverse the disassembly steps to put the stove back together. Tighten screws and bolts securely.
Conclusion:
Regular maintenance, including auger removal and cleaning, is essential for the optimal performance of your Englander pellet stove. By following these steps, you can efficiently remove, clean, and reassemble the auger, ensuring your stove operates at its best for years to come. Always refer to your stove’s manual for model-specific instructions and guidelines.