A log sawhorse is an essential tool for anyone working with firewood or lumber. It provides a stable platform for cutting logs or branches safely and efficiently. In this article, we’ll provide precise and straightforward plans to help you build a sturdy and reliable log sawhorse. Whether you’re a seasoned woodworker or just starting, these plans are designed to be clear and accessible to all.
Materials Needed:
- **Four 2×4-inch (5×10 cm) boards, each 32 inches (81 cm) long.
- **Two 2×4-inch (5×10 cm) boards, each 24 inches (61 cm) long.
- **One 2×6-inch (5×15 cm) board, 48 inches (122 cm) long.
- **Wood screws (2.5 inches/6.35 cm) or nails.
- **Tape measure, pencil, saw, and a drill.
Note: You can adjust the dimensions based on your specific needs, but these measurements create a balanced and sturdy sawhorse.
Step 1: Preparing the Legs
Take the four 2×4-inch (5×10 cm) boards, each 32 inches (81 cm) long. These will be your legs.
On each leg, measure and mark 2 inches (5 cm) down from the top. This will be the angle point for the legs to provide stability.
At the 2-inch (5 cm) mark, make a diagonal cut from the top corner of the board to the marked point. This angle will give the sawhorse its characteristic shape.
Repeat this process for all four legs. You should have four legs with angled tops.
Step 2: Building the Top Frame
Take the two 2×4-inch (5×10 cm) boards, each 24 inches (61 cm) long. These will be your top frame.
Lay the two boards parallel to each other and align their ends.
Place the 2×6-inch (5×15 cm) board across the two 2×4-inch (5×10 cm) boards to form a rectangle.
Secure the 2×6-inch (5×15 cm) board to the 2×4-inch (5×10 cm) boards by screwing or nailing them together.
Step 3: Attaching the Legs
Position the legs on the inside corners of the top frame.
Secure the legs to the top frame by screwing or nailing through the top frame into the legs. Use at least two screws or nails for each leg to ensure stability.
Ensure that the legs are evenly spaced and at a 90-degree angle to the top frame. This will provide balance and prevent wobbling.
Step 4: Final Touches
Sand any rough edges or splinters for safety and a polished look.
You can apply a wood finish, paint, or sealant to protect your log sawhorse from the elements and give it a more appealing appearance.
Conclusion
Building a log sawhorse is a practical and achievable project for anyone interested in working with firewood or lumber. These clear and straightforward plans, along with basic woodworking tools and materials, will help you create a sturdy and reliable sawhorse to enhance your woodcutting tasks. Whether you’re a seasoned woodworker or just starting out, this DIY project is both useful and rewarding.