Buck Stove Model 27000: A Technical Overview

Introduction

The Buck Stove Model 27000 is a renowned wood-burning stove celebrated for its efficiency, durability, and classic design. In this article, we will provide an in-depth technical overview of the Buck Stove Model 27000, covering its specifications, key features, installation, and maintenance requirements.

Specifications

The Buck Stove Model 27000 is a powerhouse of a wood-burning stove, and here are its technical specifications:

  1. Heat Output: The stove is capable of producing up to 72,000 BTUs (British Thermal Units) per hour, making it suitable for heating medium to large spaces efficiently.

  2. Heating Capacity: With a firebox that accommodates logs up to 21 inches in length, it can heat an area of up to 2,600 square feet, depending on factors such as insulation and climate.

  3. Efficiency: The stove boasts an impressive 75% thermal efficiency, meaning it converts a significant portion of the wood’s energy into heat.

  4. EPA Certification: The Buck Stove Model 27000 is EPA-certified, adhering to strict emissions standards, making it an environmentally-friendly heating option.

Key Features

  1. Heavy-Duty Construction: Built with rugged 1/4-inch steel, the stove ensures durability and longevity.

  2. Catalytic Combustion: This stove employs a catalytic combustor to enhance combustion, increasing efficiency and reducing emissions.

  3. Large Glass Viewing Window: The stove features a sizable glass window, providing an unobstructed view of the fire.

  4. Air Wash System: The air wash system helps keep the glass clean by directing air over the glass to prevent soot buildup.

  5. Variable Speed Blower: The built-in blower allows you to control the distribution of heat, ensuring even warmth throughout your space.

  6. Primary and Secondary Air Control: These controls enable precise management of the combustion process, facilitating efficient burning.

Installation

Proper installation is crucial for safe and efficient operation of the Buck Stove Model 27000:

  1. Clearances: Maintain proper clearances to combustibles as specified in the manufacturer’s installation manual.

  2. Chimney: Install a high-quality chimney system, complying with local building codes and regulations.

  3. Non-Combustible Flooring: Ensure the stove is placed on a non-combustible floor, like tile or stone, to prevent heat damage.

  4. Flue Pipe: Use high-quality flue pipes and ensure they’re correctly connected to the stove and the chimney.

  5. Professional Installation: For safety and compliance, consider having the stove installed by a certified professional.

Maintenance

To keep your Buck Stove Model 27000 in top condition:

  1. Regular Cleaning: Remove ashes and clean the firebox, glass, and catalytic combustor as recommended in the user manual.

  2. Catalytic Combustor Replacement: The combustor typically requires replacement every 2-4 years, depending on usage.

  3. Chimney Inspection: Periodically inspect and clean the chimney to prevent creosote buildup and ensure proper draft.

  4. Gaskets and Seals: Check and replace gaskets and seals as needed to maintain a tight seal.

Conclusion

The Buck Stove Model 27000 is a remarkable wood-burning stove that offers exceptional heating capacity, efficiency, and environmental responsibility. By adhering to its technical specifications, installation guidelines, and a diligent maintenance routine, you can enjoy a warm, cozy, and efficient wood-burning experience for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *