The Ashley Imperial Wood Stove is a reliable and efficient heating solution, well-regarded for its performance and durability. In this technical guide, we will delve into the specifics of the Ashley Imperial Wood Stove, offering both technical and practical insights.
Key Specifications
The Ashley Imperial Wood Stove is designed with the following key specifications:
Heating Capacity: This stove is capable of heating spaces of up to 2,000 square feet, making it suitable for both small and medium-sized rooms.
Burn Time: The burn time can vary depending on factors such as the type of wood and the size of the load. On average, you can expect burn times ranging from 6 to 8 hours.
BTU Output: The Ashley Imperial Wood Stove typically delivers an impressive BTU output ranging from 60,000 to 80,000 BTUs per hour. This ensures efficient and consistent heating.
Firebox Size: The firebox accommodates logs up to 18 inches in length, providing ample space for longer burn times.
Combustion System
The Ashley Imperial Wood Stove employs a non-catalytic combustion system, which simplifies operation while maximizing efficiency. It relies on primary and secondary air supplies for combustion, optimizing heat output and reducing emissions.
Primary Air: The primary air control is situated at the bottom of the stove. It governs the air supply for the initial combustion phase. It is fully open for starting a fire and is gradually closed as the fire becomes established.
Secondary Air: The secondary air control is located at the top of the stove and introduces additional air above the fire. This allows for precise control of burn intensity and duration.
Draft Control
To ensure proper draft and combustion, the Ashley Imperial Wood Stove is equipped with a draft control mechanism, usually integrated into the door. Correctly adjusting the draft control is essential for maintaining a clean and efficient burn. An open draft control enhances combustion, while a closed control reduces the burn rate.
Installation
Proper installation is fundamental to safe and efficient stove operation. Ensure the following during installation:
Clearances: Maintain the manufacturer’s specified clearances to combustible materials, guaranteeing safety and preventing overheating.
Chimney: Use a well-insulated chimney with suitable draft characteristics. It should extend above the roofline for proper draft.
Floor Protection: Place the stove on non-combustible floor protection, adhering to local building codes.
Maintenance
Regular maintenance is essential to keep the Ashley Imperial Wood Stove performing optimally. Here are key maintenance tasks:
Ash Removal: Regularly remove ash buildup from the firebox to maintain proper airflow.
Door Seals: Check and replace door seals as needed to prevent air leakage.
Chimney Cleaning: Clean the chimney at least once a year to prevent creosote buildup.
Inspection: Periodically inspect the stove for signs of wear and tear, addressing any issues promptly.
Efficiency and Environment
The Ashley Imperial Wood Stove is recognized for its high efficiency, which results in minimal emissions and less wood consumption. It meets the EPA’s emissions standards, making it an environmentally responsible choice for wood heating.
In conclusion, the Ashley Imperial Wood Stove combines robust construction and user-friendly design to provide reliable and efficient wood heating. Understanding its technical details and adhering to proper operation and maintenance will ensure years of warmth and comfort. Whether you’re heating a small cabin or a medium-sized home, this stove is a dependable choice for all your heating needs.