The Fisher Wood Burning Stove is a classic and reliable heating appliance known for its efficiency and durability. In this guide, we’ll provide you with clear and concise instructions on how to use a Fisher Wood Burning Stove, making it accessible to both technical and non-technical users.
1. Initial Safety Precautions:
Before you start using your Fisher Wood Burning Stove, ensure you’ve taken the following safety precautions:
Clearances: Maintain proper clearances from combustible materials. Consult your stove’s manual for specific requirements.
Fire Safety: Have working smoke detectors and a fire extinguisher in your home.
Carbon Monoxide Safety: Install carbon monoxide detectors to ensure safety.
2. Loading the Stove:
Loading the stove correctly is crucial for efficient and safe operation:
Fuel Selection: Use well-seasoned hardwoods like oak, maple, or cherry. Seasoned wood has lower moisture content, which results in a cleaner burn.
Airflow: Open the stove’s draft control fully to allow sufficient airflow for starting the fire.
Kindling: Place crumpled newspaper or firestarter at the stove’s bottom, add kindling, and then arrange larger wood pieces.
3. Starting the Fire:
Light the newspaper or firestarter and slowly close the stove door. This will gradually heat up the stove and create an updraft.
As the fire builds, you can begin adding larger wood pieces.
4. Air Control:
Understanding and using the air controls is essential:
Primary Air Control: This controls the amount of air entering the stove for combustion. It should be opened fully when starting a fire and adjusted as needed to control the burn rate.
Secondary Air Control: This control regulates the airflow over the fire and affects heat output. Adjust it to balance heat production and burn time.
5. Maintaining the Fire:
Regularly check the fire to ensure it’s burning cleanly and efficiently.
Add wood as needed, ensuring you don’t overfill the stove.
6. Cleaning and Maintenance:
Regular cleaning and maintenance are essential for efficient and safe operation:
Ash Removal: Empty the ash pan regularly to maintain proper airflow.
Chimney Cleaning: Have your chimney inspected and cleaned annually by a professional to remove creosote buildup.
Stove Cleaning: Clean the stove’s exterior and glass with appropriate materials when it’s cold.
7. Troubleshooting:
If you encounter any issues, refer to your stove’s manual or contact a professional. Common issues may include a slow burn, excess smoke, or difficulty starting a fire.
8. Safety Reminders:
Always use a fire screen or glass door when the stove is in use to prevent sparks or embers from escaping.
Do not burn trash, treated wood, or anything other than dry, seasoned firewood.
9. Extinguishing the Fire:
To extinguish the fire, allow the wood to burn down, and then close the draft control fully. Ensure the stove is cool before leaving it unattended.
In conclusion, using a Fisher Wood Burning Stove is straightforward when you follow these steps. Always prioritize safety, follow the manufacturer’s instructions, and consult a professional if you have any concerns. With proper use and maintenance, your Fisher Wood Burning Stove will provide you with reliable and efficient heating for years to come.