Focus Wood Burning Stoves are renowned for their efficiency and design. In this article, we’ll delve into the key technical details of these stoves, offering a clear and concise understanding for both technical enthusiasts and newcomers.
Key Specifications
Heating Capacity:
- Focus Wood Burning Stoves are engineered to heat spaces ranging from 800 to 2,200 square feet, depending on the model. They typically provide a heat output of 30,000 to 70,000 BTUs per hour, making them suitable for various room sizes.
Efficiency:
- These stoves are known for their high efficiency, often rated between 75% to 85%. This means they effectively convert a significant portion of the wood’s energy into heat, resulting in less wood consumption and lower emissions.
Emissions:
- Focus stoves adhere to or surpass EPA (Environmental Protection Agency) standards for emissions. They emit minimal particulate matter into the environment, aligning with responsible environmental practices.
Burn Time:
- Depending on the model and burn rate, Focus stoves can provide a steady burn for up to 8 hours on a single load of wood, making them ideal for overnight heating.
Flue Size:
- These stoves are compatible with a standard 6-inch flue, an industry-standard size that simplifies installation for those familiar with wood stove setups.
Certifications:
- Focus Wood Burning Stoves undergo stringent testing and certifications to ensure safety and compliance with industry standards.
Combustion System
Focus Wood Burning Stoves feature a sophisticated combustion system designed to maximize efficiency and minimize emissions. Key elements of this system include:
Primary and Secondary Air Control: The stoves come equipped with levers to control both primary and secondary air supplies. The primary air lever manages the initial burn, while the secondary air lever ensures complete combustion of gases. These controls provide precise combustion management.
Air Wash System: An integral air wash system keeps the glass clean by directing a controlled flow of air over the glass. This prevents soot and creosote buildup that can obscure the glass and impede efficiency.
Optional Catalytic Combustor: For even greater efficiency and reduced emissions, Focus Wood Burning Stoves offer an optional catalytic combustor that can be installed.
Installation and Safety
Proper installation is paramount for both safety and stove performance. Here are some installation and safety considerations:
Clearances: Ensure the stove has the required clearance from combustible materials as specified in the stove’s manual. Adequate clearances are essential for safety and efficiency.
Chimney: Use a well-maintained and insulated chimney. If you are unsure about the chimney’s condition, consider a professional inspection.
Floor Protection: Install the stove on a non-combustible floor protector to prevent damage to the flooring and ensure safety.
Professional Installation: For those unfamiliar with stove installations, it’s advisable to hire a professional to ensure safety and compliance with local regulations.
Maintenance
To keep your Focus Wood Burning Stove in top condition, adhere to these maintenance tips:
Regular Cleaning: Routine cleaning of the stove’s glass, firebox, and flue is essential to prevent creosote buildup and ensure efficient burning.
Gasket Inspection: Check and replace gaskets as needed to maintain a proper seal.
Catalytic Combustor (if installed): If you have the optional catalytic combustor, periodically inspect and clean it for optimal performance.
In conclusion, Focus Wood Burning Stoves are celebrated for their quality construction, high efficiency, and minimal emissions. Proper installation, operation, and maintenance are key to enjoying the warmth and eco-friendliness these stoves offer. Whether you’re a seasoned wood stove user or a newcomer, these stoves provide dependable heating while prioritizing environmental responsibility.